Paving – Projects and Qualified Teams

Paving combines civil engineering and craft work: driveways, paths, courtyards, squares, and industrial surfaces of concrete or natural-stone pavers must carry loads, drain water, and remain dimensionally stable for decades. The trade covers the full build-up – excavation, frost-protection layer, base course, bedding, pavers, and joint filling – along with kerbs, channels, level adjustments, and barrier-free transitions. Adequately sized frost protection (30–60 cm depending on use), clean compaction, and correct bedding are essential. Example Germany: execution follows DIN 18318 (VOB/C) and the ZTV Pflaster-StB guidelines of the road research association FGSV.

FAQ

How much does paving cost per m² as subcontracted work?

Which build-up depth for which use?

Which paver type for which use?

What are the most common defects?

How long does a 100 m² driveway take?

Which infiltration and drainage rules apply?

How much does paving cost per m² as subcontracted work?: Example Germany: standard concrete pavers with normal base course 35–60 €/m² incl. material, natural stone 80–150 €/m², large-format slabs 50–90 €/m², complete system with frost protection and base 60–100 €/m². In Poland typically 30–40 % below German rates.
Which build-up depth for which use?: Example Germany: pedestrian path 25–35 cm total, car driveway 35–45 cm, truck-bearing 50–60 cm. Frost-protection layer from 0/32 gravel, base course 0/16, bedding 2–5 cm of 0/5 or 0/8 chippings. Unbonded with chip joints or bonded with mortar joints.
Which paver type for which use?: 8 cm concrete: standard for car traffic. 10 cm concrete: truck-rated. Granite/basalt natural stone: high load capacity and appearance, often visible areas. Clinker pavers: decorative and frost-resistant. Large-format slabs 60×40×6: for terraces and non-trafficked surfaces.
What are the most common defects?: Settlement from inadequately compacted base, frost damage from undersized frost-protection layer, puddling from incorrect fall (min. 2.5 % for pavers), poor jointing with washouts, missing edge restraint causing edge settlement.
How long does a 100 m² driveway take?: Complete car driveway 100 m² with excavation, frost protection, base, bedding, paving, and jointing: 5–8 working days for an experienced three-person team. Natural stone or laid patterns (arch, herringbone): 7–12 days. Weather-dependent.
Which infiltration and drainage rules apply?: Example Germany: large sealed surfaces need a municipal infiltration permit, often a stormwater fee. Permeable pavers reduce the sealing rate. Minimum 2.5 % fall to drain into channels or infiltration troughs.

Popular categories

Explore more listings